Description

DTFLINE VANTAGE II™ 14-Inch Dual-Head DTF Printer Starter Bundle - Powered by KODAK

Higher-output DTFLINE production powered by KODAK DTF inks, film and powder

This starter bundle combines the dual-head DTFLINE VANTAGE II™ printer with the essential DTF consumables manufactured by KODAK. Begin with KODAK DTF inks, KODAK DTF powder and a 100-meter roll of KODAK DTF film already included. Simply add your preferred powder-curing solution, heat press and compatible Windows PC.

• 13.7 inches printable width - Use film rolls up to 14 inches wide.
• Dual F1080 / XP600 - The printhead configuration that defines this model.
• Up to approximately 25 sq ft per hour - Actual output varies by artwork and settings.
• KODAK consumables included - KODAK inks, powder and a 100-meter KODAK film roll simplify your initial purchase and help you get started sooner.

Choose your VANTAGE package

Compare the available configurations and select the package that best matches the equipment and supplies you already own.

Available Options:

VANTAGE II Printer	VANTAGE II Printer Plus Supplies	VANTAGE II Printer & Heat Station Plus Supplies	VANTAGE II Printer Plus Supplies Powered by Kodak
14" print size | Dual Epson F1080 Printheads Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support	14" print size | Dual Epson F1080 Printheads Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support 100 meter DTF Film Roll | 1.75lb DTF Powder | DTF MagicSeal 1 Liters DTF Ink	14" print size | Dual Epson F1080 Printheads Roll Printing (up to 100m long) Built-in film cutter Advanced Continuous Ink System RIP Software ($450 value) Maintenance Kit & Hygrometer Personalized Training & Support 100 meter DTF Film Roll | 3.5lb DTF Powder | DTF MagicSeal 6 Liters DTF Ink DTFLine Heat Station V3 with Purifier
$3,959.99 view item	$4,179.99 view item	$4,399.99 view item	$4,250.00

Why choose DTFLINE VANTAGE II™?

A dual-printhead DTF production system designed for growing shops that need more throughput while keeping a compact footprint, standard 110V power, and a straightforward roll-fed workflow.

Two Epson F1080 / XP600 printheads increase production capacity over single-head systems. The printer combines that added speed with integrated film handling, white-ink management, automatic cleaning and a continuous ink supply for a more efficient daily workflow.

This package pairs the printer with KODAK-manufactured DTF inks, film and powder, giving you a recognizable, professionally manufactured consumables package from the start.

Features

• Film and printable width: Accepts DTF film rolls up to 14 inches wide; maximum printable width is 13.7 inches.
• Dual Epson F1080 / XP600 printheads: Configured for the output level and operating profile of this VANTAGE model.
• High-resolution DTF output: Supports fine detail, smooth gradients, and vibrant transfer output when properly profiled and maintained.
• Production output: Up to approximately 25 sq ft per hour, or up to approximately 75 shirts per hour, depending on artwork size, print mode, nesting, and the rest of the workflow.
• Broad application range: Create transfers for compatible cotton, polyester, blends, denim, leather, and other materials.
• Built-in roll feeder and cutter: Supports continuous film handling and clean sheet separation with less manual handling and film waste.
• Built-in heater: Helps control the printed film before powdering, reduce excess powder, and improve the finished transfer feel.
• Dual white-ink management: Combines white-ink stirring and continuous circulation to help keep pigment mixed and moving. Routine maintenance remains essential.
• Vacuum platen: Helps hold film flat and stable for smoother feeding and a lower risk of head strikes.
• Automatic cleaning and continuous ink supply: Supports more consistent day-to-day operation and longer production runs.
• Hygrometer sensor: Makes it easier to monitor the print-room humidity that affects white-ink performance.
• 110V power: The printer connects to standard power without a special printer circuit. Verify the requirements of any separate curing equipment.
• RIP software, onboarding, and training: Core software and personalized virtual guidance are included to help shorten the learning curve.

Included in this bundle

• DTFLINE VANTAGE II™ dual-head printer with built-in roll feeder and cutter
• KODAK DTF ink set - 1 liter total: 360 ml White and 180 ml each of Cyan, Magenta, Yellow and Black
• KODAK DTF powder - 1.75 lb
• KODAK DTF film - 14-inch x 100-meter roll
• Driver and RIP software
• Personalized virtual onboarding and training

Additional equipment required

• Powder application and curing equipment
• Windows PC with a built-in Ethernet port
• Heat press for applying finished transfers
• Humidifier for maintaining the recommended 55-75% RH environment

Printer specifications

• Film compatibility: Accepts rolls up to 14 inches (35.5 cm) wide; roll feeder included
• Maximum printable width: 13.7 inches
• Printhead configuration: Dual Epson F1080 / XP600 printheads
• Estimated output: Up to approximately 25 sq ft per hour; up to approximately 75 shirts per hour depending on artwork size, print settings, nesting, and workflow
• Printer power: 110V standard power
• Printer dimensions: 31 x 19 x 13 in uncrated; 35 x 22 x 16 in crated
• Printer weight: 72 lb uncrated; 100 lb crated
• Computer requirement: Windows 7 or later PC with a built-in Ethernet port for RIP connectivity
• Recommended environment: Maintain approximately 55-75% relative humidity; a humidifier may be required

Warranty, availability, and support

6-month warranty: Includes replacement of defective materials, excluding consumable components such as printheads and inks. Review the warranty and terms page for complete coverage, exclusions, and procedures.

Availability: Available for ordering from current inventory, subject to stock availability.

Personalized onboarding: Virtual setup guidance and training are included to help your team prepare the system and establish the required operating and maintenance routines.

Specifications